We’re presenting a new concept of modular shade that can turn on its pillar supports and as such find the ideal solar angle. It allows the installation of a motorised movement system, for supposed solar tracking with photovoltaic panels, or to create interesting cinematic effects with the shapes that slowly spin or swing back and forth, like gentle waves produced by the wind.

According to the desired effect and density of shade, we can choose between a type of cover with slats, geometric lattices or continuous membrane, in any of the standard materials found on the market.

This concept is contemplated to provide a new landscaping focus for seaside promenades, outdoor parking areas or large plazas and gardens where we wish to create surprising effects for pedestrians.

Using our extensive experience in moulding slide layouts, on this occasion we’re proposing an original fountain. Its curved shape is reminiscent of an elongated leaf. Its sloping, softly-bent stem provides an adequate working height to support a curved solar panel.

An outstanding, ecological and autonomously functioning fountain, for pedestrians’ visual delight and climatic comfort.

Under the perimeter of photovoltaic cells, integrated during the moulding of the panel, it has a hydraulic circuit that will create a smooth water curtain. The collection basin will allow any perimeter outline and for one or several fountains to be integrated, to be placed at different angles or to be adapted to any new or existing design.

The system of batteries and pumps can be installed in the base of the sculpture or in an independent plantroom, according to the scope of intervention. The structure allows LED RGB lighting to be installed, to colour the water with any nocturnal atmospheric scenic effect.

We’re presenting the Clover Twirl, a new component in our range of SprayToys, interactive elements for children’s pools.

A four-leaf clover shaped shade-shower. Water falls from one of its leaves, towards the pool. Its curved stem can be rotated 360º on a vertical swivel mechanism, which cuts the flow of water outside a determined angle. When the shade is oriented towards the lounger area, the hydraulic mechanism stops the flow of water and the waterfall does not wet the outside of the pool.

It can be installed on the border of any pool on a special anchor plate with reduced footing, making use of the pool basin’s civil works. It can also be used dry, without a hydraulic circuit, to create original plant-inspired swivel shades and in any combination of colours, covering wide areas of relaxation that they will shade during any hour of the day.

This proposal consists of a vast organic undulating shape, whose central nerve rests on the ground on two points. Its design allows for various positions on the ground, either alone or as a combination. Depending on the pedestrian’s viewpoint, the smooth curves of its shade transmit different visual sensations, all with strong organic and plant inspiration. The supporting structure emulates the thick stem of a giant leaf, or even the tail of a marine animal at the point of diving.

The Wavy Shades program is contemplated to cover large public areas with a minimum of support points, thanks to each gateway’s 75m2 of shade and the 12m arch between each base. It is an excellent solution for bus stops, rest areas on seaside proms, parking zones or central urban plazas where the added value of great formal beauty is required.

We’re presenting a new shade cover for public spaces, produced with our exclusive 3DTech system, which allows the creation of self-supporting structures with high added-value. The giant leaves allow for variations in shape and orientation and the curved stems produce harmoniously combined, elegant outlines to frame routes, or to highlight resting or break areas.

Thanks to the qualities of 3DTech, we can apply any texture and colour on the leaves and branches, to strengthen the organic or geometrical characteristics, adapting them to any aesthetic criteria of the surroundings where they are to be installed. The system of giant leaves permits hydraulic circuits on the interior of the structure, to install misting sprays for very dry climates.

This is a different conception of urban lighting, a strategy that reverses the notion of "going unnoticed". Traditionally, streetlamps and lighting of streets and plazas, roads and motorway junctions have been more functional than decorative.

Thanks to our new 3D Tech technology, we can create interesting sculptural shapes that solve the problem of elegant solar panel alignment. The support allows the angle to be optimized according to the geographical latitude of its location and the direction of the LED lighting, in accordance with the orientation of the street or area to be lit. Its lightness allows all the mechanical characteristics of the interior post to be kept in regards to resistance, whilst facilitating improved integration and protection for the photovoltaic panels, battery and LED lights.

According to the type of urban project, our ULF program can be adapted to any style requested by the client. We cover the entire standard range of heights and signage elements can also be integrated. We can shape new urban elements, with different effects for daytime and nighttime.

Thanks to the CNC machining of any imaginable geometric or organic outline, we can offer a new solution to create divisions for architectonic spaces, with high visual impact.

The dimensions can be scaled to adjust to the visual proportions or landscape in which they are to be set and the thickness of the screen-walls can also be varied according to the structural and aesthetic parameters.

From now on, it will be much easier and more economical to create environments of great visual beauty or improve existing spaces, thanks to our exclusive prefabricated 3D-Tech system, which allows project dimensions to be adapted to an optimum modulation for their transportation and installation. Our partitioning solution is apt both for interior applications and for installation in gardens or outdoor plazas.